Need help?

30kW Liquid Cooled FC System VL-Series


This is the entry-level fuel cell stack for the mid-range liquid-cooled fuel cell stacks that Horizon Fuel Cell Technologies offers.  It can be used as a standalone or backup power supply for industrial and commercial users including hospitals, schools, and other businesses. It can also be used as an energy storage system to balance power connected to an electricity grid.

30kW Stationary Fuel Cell System

30kW Liquid Cooled Fuel Cell VL-Series

Additional Infromation

Using this fuel cell product would enable fleets that undergo such a conversion to maintain the level of power they are used to with the benefit of being environmentally friendly.  Depending on the location there may already be a local hydrogen dispensing station, but if there is not one available a company like BayoTech can help to setup a refueling supply to ensure a painless conversion to the use of this fuel cell stack.

If you are looking to replace a current diesel or gasoline engine with a fuel cell stack or if you are looking to pursue a more ambitious project, then please complete a quote request form with the information relating to your project.  This will enable us to better meet your needs as well as set proper delivery expectations for the fuel cell system.  In keeping with other liquid fuel cell stacks this stack comes with an air filter, air flow meter, hydrogen intel solenoid valve, humidifier, throttle valve, radiator, ion exchange, controller, fuel cell stack, fill water tank, fuel cell 24V water pump, constant voltage DC, and blower to bring air into the fuel cell stack


List of core VL-30 components and their functionality:

  • Air filter (Prevents damaging size particles from entering fuel cell)
  • Air flow meter (Monitoring feedback of air flow)
  • Hydrogen heat exchanger (Increase the temperature of hydrogen)
  • Intercooler (Reduce the temperature of the air entering the stack)
  • Humidifier (Adds humidity to the air entering the stack)
  • Throttle (Adjust the internal operating pressure of the stack)
  • PTC heater (Heating of low temperature cold start)
  • Water tank (Refill water to and exhaust the system)
  • Deionizer (Absorbs the ions in the coolant, reducing the conductivity of the coolant)
  • Water pump (Power the cooling system)
  • Low voltage distribution box (Provide low voltage distribution to the system)
  • Controller (Control system, communication between system and vehicle)
  • Fuel cell stack (Oxygen and hydrogen react to produce power)


30kW Liquid Cooled FC Stack VL-Series Quick Product Facts


System Rated Power

This system power output is 30kW.

efficiency icon

Fuel Cell Efficiency

Minimal fuel cell efficiency at rated power is 40%.

Temperature icon

Ambient Temperature

The system can operate in ambient temperature of -30 to 45°C / -22 to 113°F.


Stack Operating Temperature

The fuel cell stack operates best in a temperature ranging from -30 to 5°C / -22 to 41°F. (External heating aid requeird after 5°C/41°F)

Pressure H icon

Hydrogen Pressure

Hydrogen must be fed into the fuel cell stack at a pressure of 1.1+- MPa.

drop icon

Hydrogen Purity

A fuel of gaseous hydrogen at a minimum purity level of 99.97% is required.

Request a Quote. We will contact you shortly.

Loading ...