Besoin d'aide?

H-30 PEM Fuel Cell - 30W

High School University

Lorsque vous cherchez à acheter des piles à combustible pour le développement de nouveaux produits, les tests ou l'intégration de systèmes, vous trouverez probablement la meilleure valeur possible chez Horizon Educational. Nous proposons la plus large gamme de systèmes de piles à combustible PEM standard. Nos systèmes standard sont simples, efficaces et présentent certaines des densités de puissance les plus élevées disponibles dans le monde, ouvrant de nouvelles possibilités pour les projets universitaires.

  • Vanne électronique miniature
  • Contrôle électronique
  • Ventilateur et boîtier intégrés
  • Protection basse tension
  • Pile de 30 W avec ventilateur
FCS-B30 H-30 PEM Fuel Cell 30W

Fuel Cell Stack 30W

Additional Information

Like other entry-level fuel cell stacks, the H-30 can be purchased without any supporting components.  However, Horizon Educational recommends contacting us to build an easy-to-use package in order to facilitate incorporation of the product into your project.  Click here to fill out a quote request form if you would like to create a complete package that includes the fuel cell stack and required supporting components.

30W Fuel Cell and Hydrogen

Safety Requirements

Do not connect or disconnect power cables when the fuel cell stack is turned on. Warranty is void if the fuel cell stack is disassembled or otherwise altered. Hydrogen is a colorless, odorless, and flammable substance.  Always operate and store the fuel cell stacks and hydrogen storage canisters in an area with ample ventilation. Fuel cell systems should always be equipped with a highly accurate hydrogen sensor to detect any leaking hydrogen within the system or from the hydrogen storage canister. Please refer to the H-30 User Manual to see a complete list of the safety requirements for the product.

Hydrogen Storage Tip

The best way to supply hydrogen to this fuel cell is using our Hydrostik Pro!  Hydrostiks are a great way to store hydrogen safely and economically, and the best part is that they can be filled using our HydroFill Pro electrolyzer!  Our electrolyzer is able to extract a large amount of hydrogen from a small amount of de-ionized or distilled water.

Performance: 8.4V @ 3.6A

Hydrogen consumption at rated power: 0.42l/min.

Stack dimensions: 8.0 x 4.7 x 7.5cm


 

1 x 30W fuel cell stack

1 x controller

1 x silicon tube (OD 4 x ID 2.5mm), 50cm long

1 x filter

2 x red plastic pin

1 x valve

4 x inlet/outlet gas fitting (M3-4)

Téléchargements

Datasheet

pdf [1,25 MB]
pdf [880,45 kB]

User Manual

pdf [978,05 kB]

Veuillez nous demander d'émettre un devis. Nous vous contacterons sous peu.

Chargement ...